vrbta.blogg.se - Lexmark ms310 dn restoring factory defaults

If the problem does not reoccur, replace the memory card.

Remedy: Format the flash memory: Settings > Print Settings > Utilities > Format Flash If the problem remains: 1 Remove the installed memory, and reset the printer.

Reflash the firmwarener cartridge smart chip contact removal”. Do they match? Replace the controller board. See “ToStep 2 Check if the firmware level matches the serial number. Replace the toner cartridge smart chip contact. c Check the toner cartridge smart chip contact for damaged pins. b Make sure the toner cartridge smart chip contact is free of debris.

Step 1 a Make sure the toner cartridge smart chip contact cable JARW1 is properly connected to the controller board. Replace with a supported toner cartridge if necessary.

Remedy: 1 Check if the toner cartridge is supported.

Description: 41.xy Bottle/IU toner type mismatch 42 Printer/cartridge mismatch.

Does the error remain? Replace the controller board. Step 2 a Print the Menu settings page: Settings > Reports > Menu Settings Page b POR into the Configuration menu and reset the printer’s settings to factory default: Configuration Menu > Factory Defaults > Restore Base c Remove the memory card. Step 1 Check the memory card for proper installation.

Remedy: 1 Disable the Resource save feature: Settings > Print Settings > Setup Menu > Resource Save > Off.

Description: 35 Res save off deficient memory 37 Insufficient collation area 38 Memory full.